Saturday, 7 April 2018

Hello Butterflies

Hello Butterflies



My take on this sketch is below:


To create my card I first found a ready-made Vanilla card base (5 3/4 x 4").  I dry embossed the front panel of this card base with Stampin' Up 'Lovely Lace' embossing folder.  Next I got out my Big Shot and die cut a Spellbinders large sentiment "Hello" 5 times in purple card stock and the top one in a shiny foil purple card stock.  These I adhered together with wet glue and put an acetate block on top of it and allowed it to dry.  I found a die a similar shape to that on the sketch which was part of my mason jar die set, so I die cut this out in the same purple foil card stock as the sentiment.  I have two banner dies, so whilst the Big Shot was out I chose two purple scraps from my scrap folder and die cut these out.  The largest banner I trimmed on my trimmer and cut the banner end with my snips.

I then adhered all the banners together with wet glue and allowed these to dry.  I wanted then an image for my design, in my craft stash I found some stickers (some which were 3D with gems) that were different shades of purple.   So I adhered a large light purple butterfly onto the die cut shape with strong double sided tape.  

The banner were adhered to the card front with strong double sided tape and the die cut shape the same.  The sentiment though was adhered using wet glue and a heavy object put on top whilst it dried.  There was a small dark blue/purple butterfly which I adhered to between the 'H' and 'l' on the sentiment.  

Now for the inside of the card:


I used two more stickers from the sheet to continue the theme, a large blue/purple butterfly and a purple Pansy.  

Next I decorated the envelope:


I adhered the rest of the Pansies to the bottom left-hand corner as well as a small blue/purple butterfly.  At the top left-hand corner I stamped the duck delivering mail and a 'Happy Mail' sentiment so that my recipient would know that this is not a bill!  This completed my project.

I would love to know what you think about my project, so please leave a comment.  Thank you.

Till next time, keep crafting!



Lorraine

:o)  

Thursday, 5 April 2018

Waterfront Masculine Card

Waterfront Masculine Card

Inspire.Create #015 is a Theme Challenge to create a Masculine card.  This is my submission for this challenge.


To create my project I used Black Memento Ink and Memento Dewdrop inks (Dandelion, Toffee Crunch, Bamboo Leaves, Tuxedo Black and Daube Blue)

First I cut a piece of White card stock (8 1/4 x 5 7/8") on my trimmer and the folded this in half and burnished the fold with my bone folder.  I then cut a further piece of White card stock which was     (5 3/8 x 3 3/4").  Also a piece of striped patterned paper was cut to (5 1/8 x 3 1/2").  This was adhered with snail adhesive to the White piece of card stock.  A hole was punched in each corner and then copper eyelets put in the holes and squeezed together with the eyelet tool.  

Then on the Big Shot a White oval was die cut from card stock.  Using Stampin' Up 'Waterfront Stamp set' and the Memento Dewdrop Inks an image was printed onto the oval piece of card stock including a sentiment 'Happy Birthday'.  

"Happy Mail" and the Duck with his envelope were stamped onto the front of the envelope and this completed my project.

I would love to know what you think about my project, so please leave a comment.  Thank you.

Till next time, keep crafting!



Lorraine

:o)  

Red Shoes

Red Shoes


I want to thank Sandi Maclver again for her video tutorial on her YouTube channel demonstrating how to put together a Rectangle Pop-Up Box Card which will fit into an A2 envelope.  To understand how to put this project together please follow the link to Sandi's video tutorial and for all the measurement follow the link I have set up to Sandi's Blog Page, thank you.  

Ok now I will let you know how I decorated my project.  I also need to thank another crafter, Dannielle Rose (whose YouTube channel video tutorials are fabulous).  I saw this video tutorial and fell in love with the shoe die and I knew that my best friend would love this shoe die too.  Dannielle was so lovely that she die cut me 4 of the shoes in Red card stock for me to use.  So thank you Dannii.

I constructed my rectangle box card using a Silver card stock, that included the two little inserts for the centre.  I left the back panel double the size of the rest of the panels in order that the shoes would show up against the silver panel.  I cut two small pieces of acetate to attached to the base of the shoes and these were adhered to the inserts in the centre.  On the back of the back panel I put a piece of White card stock which gave me somewhere to write my greeting.  In my craft stash I had black stickers which I used for the  'Happy Birthday' sentiment and the '5' and '0' these were adhered to the back panel at the top.  I coloured four lots of  '5' and '0' stickers with red permanent marker pen. I also coloured some silver stickers of shoes and handbags with red permanent marker too.  These dry quite quickly but do leave them a while to dry before adhering them to a project.  These images were put on the box flaps to decorate them in a similar theme to the die cut shoes.  

These stickers are useful to have in your craft stash for when you only have small area for a sentiment or your want a sentiment to stand out a bit on your project.

I would love to know what you think about my projects, so please leave a comment.  Thank you.

Till next time, keep crafting!


Lorraine

:o)

Retiform Technique Male Card

Retiform Technique Male Card

I needed to make a card for my Father-in-law and I wanted to make him a card which was a bit different.  Cards for males you seem to find that they have sport or drink or vehicles on them because it is not easy to make masculine cards. 

On a ready-made cream card base (5 x 5") with Desert storm Memento Dewdrop ink and a sponge circular blender I used the Retiform technique to create the background for the E-Z Rub on Transfers.  I had been gifted these from another crafter and I  had never used such a resource before.  This particular set was of marina images from the past which I thought were a little different.  

I rubbed the transfers on in different places on the front panel not worrying too much if the whole image did not transfer completely as this gave the image character.  In my craft stash I found a suitable 'Happy Birthday' sentiment to adhere on top of the images to complete my project.


I would love to know what you think about my project, so please leave a comment.  Thank you.

Till next time, keep crafting!



Lorraine

:o)  

Cross-Stitch Cards

Cross-Stitch Cards

Whilst I was resting (Bed rest) after being in hospital I could not do any craft cards so I decided to do some cross-stitching instead.  I could do this in bed with very little resources necessary.  Here are the ones I achieved and how I presented them when they were complete.  


 I did not realise that I had two of this cross-stitch card designs but I thought I might as well complete them both.  The only difference is that on the latter one I used a darker pink embroidery thread to outline the flowers.  These were little kits from Cross-stitch magazines that I had kept.  They had card bases which were already printed for them.  All I had to do was insert the cross-stitch and adhere this with strong double-sided tape and then close the inside of the card also with strong double sided tape and the cards were complete.  I did not stamp a sentiment inside the card because I was waiting until I know what occasion I am sending them for.  The envelopes were stamped with my 'Happy Mail' stamp and the duck holding the envelope so the recipients know these are not bills!  I do this to all my card projects as I feel that when someone picks the envelope up off the floor they will instantly feel better when they see they have some 'Happy Mail'.  This completed these projects.


This cross-stitch I put into one of my craft stash card bases with a circular aperture.  On the bottom of the card base, I stamped a garden gate and a stone wall with a cat walking across this.  I put a pink ribbon on the inside panel when I was adhering the cross-stitch so that it would not be seen when the inside panel was adhered closed.  Then on the front of the card I tied a knot in the centre of the left-hand side of the card base.  Inside the card to follow the theme I stamped 'Welcome to your New Home' and stamped a tree as well.  Then on the envelope I stamped two houses and my 'Happy Mail' stamp.  This completed this project.


This cross-stitch project was very small, it was just the bunny's head.  But the kit had provided a coloured printed image of the bunny having a bath in a barrel.  So I used this and adhered the cross-stitch behind this on a piece of Blue card stock (5 1/2 x 3 3/4") this was adhered to front panel using foam tape to give the card some dimension.  The White card base was a ready-made card (5 3/4 x 4).  I put a silver sticker 'Happy Birthday' at the top left-hand corner and used my silver border stickers all around the edge of the coloured image.  Inside the card to continue the theme I stamped some bubbles and the duck holding the envelope.  Also I had a piece of the Blue card stock left over which measured (4 x 1/4") and I added some of the silver border sticker to this as well before adhering it to the bottom of the inside panel.  On the envelope I added the same Blue card stock with the silver sticker border (5 1/2 x 1/4") along the bottom.  I stamped some bubbles and the duck holding the envelope representing 'Happy Mail'.  This completed this project. 


 

Originally this cross-stitch was a Christmas one, but I decided to change it to a more general image so the hat became all red rather than it being a Santa's hat.  I put this into a ready-made card base with a circle aperture that I had in my craft stash.  On the front of the card I die cut the sentiment "Many thanks" on Red card stock which had been adhered to double sided sticky foam.  This meant that I could adhere the sentiment straight to the card front without any further adhesive, I just had to remove the backing paper.  I had some of the red card stock left where the sentiment had been cut from so I sent this back through the Big Shot with a variety of different sized hearts from my die stash.  These too were now sticky on the back and on foam so I could arrange them around the cross-stitch image.  I put one inside to continue the theme and stamped the sentiment '...for your kindness' which finished off the sentiment from the front. (Many thanks ... for your kindness)

On the envelope I stamped the sentiment 'Happy Mail' and at the bottom left-hand corner of the envelope I stamped two hearts to continue the theme to the envelope too.  This completed my project.  

That was 5 cross-stitched images which I had converted into cards.  I would love to know what you think about my projects, so please leave a comment.  Thank you.

Till next time, keep crafting!



Lorraine

:o)    

One Sheet Wonder Designer Purse

One Sheet Wonder Designer Purse

I watched Connie Stewart's video tutorial on her YouTube channel called 'One Sheet Wonder Designer Purse'.


I followed Connie's instructions to construct the purse, although with the handle I added gold foil to the outside and the DSP on the inside. (Connie's instructions just use the DSP)  

To close my purse I used a Velcro circle and for embellishment I added a pearl heart on the front.  This completed my project.  

I would love to know what you think about my project, so please leave a comment.  Thank you.

Till next time, keep crafting!



Lorraine

:o)     



Magnolia

Magnolia



So for my submission for the theme challenge I looked through my old stamps that I was gifted from another crafter who no longer stamps but does other types of crafts instead.  I found a stamp of a little girl, which I thought was cute.  Then I remembered that  as I was looking through Amazon a couple of days ago for a particular Ballerina stamp (I had seen a crafter use in a project); I had seen a different stamp of the same character and she was called "Magnolia".  I then proceeded to look up the stamp I had chosen to use and I could not find it anywhere; which brought me to the conclusion that it must be quite old.


So to complete my submission you would need Black Memento Ink and Prismocolor Pencils.  I had a ready-made card base in my craft stash (6 x 4").  I cut another of these ready-made card bases in two so that I could trim a piece to (5 1/2 x 3 3/4") and put this through the Big Shot in a retired Stampin' Up embossing folder.  I chose this because it seemed to go with the crosses on the stamp.  While the Big Shot was out I cut a (4 x 3") oval in White card stock and a (5 x 3 3/4") in a Pattern Vellum.  I also cut out a small oval in dark Purple card stock (2 x 1 1/4").

Next I stamped the Magnolia image onto the white oval card stock and coloured this with my Prismocolor Pencils.  I added Wink of Stella to her dress and the crosses and I blended the background with my Zest blend solution.  After finishing colouring, I stamped on the inside of the card a long star border at the bottom and a sentiment which said "With Love On Your Special Day".  On the envelope I stamped the same star border at the bottom and the duck with the envelope and the 'Happy Mail' at the top right-hand corner so my recipient will know that this is not a bill!

I adhered the dry embossed card stock to the base with foam tape to give dimension.  Then I put snail down the middle of the Vellum so this would not be seen because of the image.  The stamp image was adhered straight to the Vellum using snail adhesive too.  

I was not sure what I was going to do with the small Purple oval.  So I used the melon punch from the Stampin' Up 'Fruit Basket' stamp set and punched a small semi-circle at each end of the oval.  I then threaded a (1/2") Purple ribbon through the semi-circles.   I then created a loop at each end and secured the edges with strong double sided tape on the back.  I used the same double sided tape to adhere this to the bottom of the card base.  From my craft stash I found a small sentiment saying 'Friend' so I used the double-side tape to adhere this to the Purple ribbon and this completed my project.  

I would love to know what you think about my project, so please leave a comment.  Thank you.

Till next time, keep crafting!



Lorraine

:o)     

Week 3

Incredible Like You (2) Second set of 4 cards created from the card kit from Stampin' Up 'Incredible Like Y...